Airvent's
VSL iNova glazed casement ventilator is designed
for the natural extraction of heat, smoke and fumes. The ventilator
is ideal for vertical installation in an atrium, multi-storey building
or shopping mall where the aesthetics of a glazed facade are required.
The iNova combines total versatility with enhanced
architectural features and has the capability to be bottom, top
or side hung depending on the project requirements. Ventilators
can be installed from 80 degrees to the vertical. (For inclined
applications see our ISL Luma range.)
The ventilator comprises an inner and outer frame
with snap on glazing bead. The frames have been designed to provide
a unique slim, unobtrusive profile. All components are manufactured
from aluminium extrusions to BS1474 Grade 6063.
The ventilator is fitted with integral gaskets. All hinge and operating
mechanisms are fully concealed within the outer frame. Operation
is by pneumatic or electric actuators.
Infill options are available from 6mm to 40mm as standard with glass,
polycarbonate or acoustic insulation.
The iNova can be supplied with a polyester paint finish from our
standard range of colours to BS6496 as an optional
extra.
The VSL has been independantly tested to meet the requirements of
EN12101-2 and also complies with BS7346:
Part 1: 1990. Weather tested for watertightness and wind
resistance performance by a third party test certificate E
213.8.119 from CEBTP and meets the requirements
of BS5368/ BS6375.
The ventilators can be manufactured to a wide range of sizes dependant
upon roof slope, operation and glazing option. Ventilators can be
either rectangular or trapezoidal.
|
