Brakel® Enforcer 54
ENFORCER 54 Practical and aesthetic multi parallel linked blade smoke damper
The Enforcer 54 combination smoke and fire damper has been designed to satisfy smoke ventilation applications and is particularly suited to smoke evacuation shafts and risers in multi storey buildings.
The Enforcer 54 is manufactured from robust 1.5mm galvanised steel and is fully tested to the requirements of EN1366 Pt 2 for 1 hour. Usefully the damper combines both a low leakage rate when closed with a high free area when open, to support high smoke evacuation rates.
The damper is fitted with a Belimo actuator to offer either powered motor open/close or failsafe spring return open/closed actuation according to requirements. It is available in a wide range of sizes ranging from 400 x 400 to 1000 x 2000 with sizes based on the structural opening (aperture) dimensions. Effectively this means the largest size single damper can provide up to 1.5m2 of free area (multiple options are available).
The damper face can be powder coated to a stock RAL colour, with an optional cover plate fitted to disguise the motor. Alternatively dampers can be masked with fixed blade type architectural cover grille or louvre – with blades angled at 40° for virtual full masking or 15° for partial masking. These cover grilles can be face screw fixed or concealed fixed according to preference.